6
4.3
The FOX 2’s 120VAC warning beeper will not sound if the
battery is dead. Do not rely on the beeper to indicate the
presence of dangerous voltages.
4.4
The 120VAC protection circuit in the FOX 2 uses a light bulb,
whose glow can sometimes, but not always, be seen thru
the FOX 2’s case. Do not rely on this visual indication to
determine the presence of dangerous voltages.
4.5
The FOX 2 is not designed to tolerate accidental application
of voltages exceeding 132VAC 60Hz. Applying higher volt-
ages may cause damage to the FOX 2, and may injure the
user.
4.6
The FOX 2 is not designed to indicate any degree of preci-
sion in the accidentally applied voltage. That is, when the
warning beeper sounds, this does not mean that exactly
120VAC is present. The warning beeper will sound for volt-
age from approximately 80VAC to 132VAC.
4.7
Use care when connecting the FOX 2 to any wire or cable.
An unexpected dangerous voltage may be present, which
may result in injury to the user.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General