Do you have a question about the Tripp Lite AVRX550U and is the answer not in the manual?
Waveform | Sine |
---|---|
Efficiency | 95 % |
Output power | 300 W |
UPS topology | Line-Interactive |
Input frequency | 50/60 Hz |
Maximum current | 10 A |
Audible alarm(s) | Yes |
Country of origin | China |
Surge energy rating | 320 J |
Output power capacity | 0.55 kVA |
Number of input phases | 1 |
Output voltage regulation | +8, -21 % |
Power protection features | Over voltage, Under voltage |
Surge protection features | Telephone |
Input operation voltage (max) | 282 V |
Input operation voltage (min) | 159 V |
Output operation voltage (max) | 240 V |
Output operation voltage (min) | 220 V |
Interface | USB |
Weight (imperial) | 10.4 lbs |
Nominal input voltage | 230 V |
Non-operating relative humidity (non-condensing) | 0 - 95 % |
Typical backup time at full load | - min |
Typical backup time at half load | 5.1 min |
Form factor | Tower |
Cable length | 0.2 m |
Certification | CE, GOST, SASO, FCC, EN62040 |
Product color | Black |
Rack capacity | 2U |
Housing material | Acrylonitrile butadiene styrene (ABS) |
Bundled software | PowerAlert UPS |
Storage temperature (T-T) | -15 - 50 °C |
Operating temperature (T-T) | 0 - 40 °C |
Power plug | C14 coupler |
AC outlet types | C13 coupler |
AC outlets quantity | 6 AC outlet(s) |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Sustainability certificates | RoHS |
Master (outer) case width | 457.2 mm |
Master (outer) case height | 266.7 mm |
Master (outer) case length | 342.9 mm |
Master (outer) case weight | 18730 g |
Quantity per master (outer) case | 4 pc(s) |
Master (outer) case GTIN (EAN/UPC) | 10037332123470 |
Depth | 147.3 mm |
---|---|
Width | 279.4 mm |
Height | 88.9 mm |
Weight | 3860 g |
Package depth | 223.5 mm |
Package width | 340.4 mm |
Package height | 116.8 mm |
Package weight | 4630 g |
Warnings for installing the UPS indoors, away from heat and moisture.
Guidelines for connecting the UPS to AC power outlets safely.
Precautions for connecting external equipment to the UPS output.
Safety measures and precautions for handling UPS batteries.
Instructions for turning the UPS on/off and performing self-tests.
Explanation of the ON/OFF and OVERLOAD/CHECK BATTERY indicator lights.
Description of the internal system that adjusts voltage fluctuations.
Details on the primary outlets providing backup and protection.
Secondary outlets offering only surge protection.
Descriptions of AC inlet, USB, Tel/DSL, and ground connections.
Details regarding the battery replacement door and procedure.
Instructions for connecting the UPS and equipment.
Details on optional USB and Telephone/DSL protection connections.
Steps for when the power indicator light does not illuminate.
Guidelines for properly storing the UPS and its batteries.
Information on obtaining service and returning products for repair.
Information on series numbers, WEEE compliance, and product specifications.