Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model Number: B126-004
HDMI over Cat5 Extender/Splitter - 4-Port Local Transmitter Unit
Highlights
Supports computer video resolutions up to 1920 x 1200, and HD resolutions
up to 1080p (60Hz)
HDCP and 3D compatible
Compatible with both stereo audio and 7.1 channel surround sound audio (7.1
channel surround sound signal will be Multi-Channel or PCM)
Supports 24-bit True Color (8-bits per channel)
Features an additional HDMI port for the connection of a local monitor
The local monitor port can be used to daisychain up to three B126-004
transmitters
Can further expand the range and number of monitors by adding repeaters
Mounting hardware included
Description
The B126-004 transmits a 1080p (60Hz) signal to four monitors up to 150 ft. away using Cat5e/6 cable. To achieve maximum distance and
resolution, use 24Awg Solid Wire Cat5e/6 cable. (Tripp Lite's N202-Series) Daisychain up to three B126-004 transmitters to connect up to 13
monitors (1 Local, 12 Remote). Supports 24-bit True Color (8-bits per channel), HDCP, 3D, and both stereo audio and 7.1 channel surround sound
audio (7.1 channel surround sound signal will be Multi-Channel or PCM).
Installation is simple. Connect the B126-004 transmitter to an HDMI source using a Tripp Lite P568-Series HDMI cable (not included). Connect a
Tripp Lite B126-series receiver (not included) to each display using a Tripp Lite P568-Series HDMI cable (not included). Finally, each remote
receiver is connected to an RJ45 port on the B126-004 using a single Cat5e/6 cable.
For longer extension distances, use a B126-1A0 or B126-1A0-WP-1 active receiver:
A 1080p (60Hz) signal can be transmitted up to 150 ft.
A 1080i (60Hz) signal can be transmitted up to 200 ft.
A 3D signal can be transmitted up to 125 ft.
For shorter distances, use a B126-1P0 or B126-1P0-WP passive receiver:
A 1080p (60Hz) signal can be transmitted up to 50 ft.
A 1080i (60Hz) signal can be transmitted up to 100 ft.
Cannot be use for a 3D signal
Further extend the signal range or add more displays by using a Tripp Lite B126-110 Remote Repeater unit:
Add up to three repeaters on each channel of the B126-004 for a total of 4 displays per channel (A receiver should be the last unit in a
channel)
A 1080p (60Hz) signal can be extended up to 125 ft. for each repeater added into a channel
A 1080i (60Hz) signal can be extended up to 175 ft. for each repeater added into a channel
A 3D signal can be extended up to 100 ft. for each repeater added into a channel
Package Includes
B126-004 HDMI Over Cat5 Extender/Splitter, 4-Port
1 ft. HDMI daisychain cable
To Next Page
Need help?
General
