Removes EMI/RFI noise, utility switching transients, background spikes and power problems generated by other on-site loads, utility
grid-switching and lightning related surges
Line isolation with additional surge suppression components offer continuous line filtering of a full range of power line noise in all modes
Continuous transformer filtering with no wearable parts reduces surges in the worst of power environments to harmless levels
Includes 4 widely-spaced NEMA5-15R output receptacles, 6 ft power cord, circuit breaker overload protection and lighted power switch
Rugged all-metal housing ships ready for upright tower or wallmount installation
Specifications
OVERVIEW
Amp Capacity 4.2A at 120V AC
Efficiency 96%
Form Factor Small tower format, wall mountable
Input Plug Type NEMA 5-15P
Let-through Voltage
(Combination Wave)
L-N:
Let-through Voltage (Ring
Wave)
L-N:
Noise Suppression Rating 33-65dB normal mode; > 80dB common mode
Nominal Voltage / Frequency 120V / 60Hz
Output Receptacle Qty / Type 4 NEMA 5-15R
Over Current Protection Yes, 4.5A circuit breaker
Suppression Joule Rating 680 Joules
Surge Test Conditions Per ANSI/IEEE C62.41 - (IEEE587) Cat. A & B test waveforms
Total Harmonic Distortion less than 1%
Transformer Type Low impedence isolation transformer
VA / Watt Capacity 500
INPUT
Input cord length (ft.) 6
Input cord length (m) 1.83
PHYSICAL
Shipping weight (lbs) 23.6
Shipping weight (kg) 10.71
Cooling method Convection
Unit Dimensions (HWD/in) 5.5 x 6.25 x 8.5
Unit Dimensions (HWD/cm) 13.97 x 15.88 x 21.59
Shipping Dimensions
(HWD/in)
7.25 x 13.25 x 6
Shipping Dimensions
(HWD/cm)
18.42 x 33.66 x 15.24
Unit weight (lbs) 22.6
To Next Page
Loading...
