3
Specifications
Model
Amperage
Rating
Outlet
Qty. x Type Input Plug Cord Length
Overall
Length Breaker
PSF2408
15A 8 x 5-15R 5-15P 15 ft. 24 in. 15A
PSF3612
15A 12 x 5-15R 5-15P 15 ft. 36 in. 15A
Wall Mounting
All Power Strip models feature clips for horizontal or vertical mounting on a variety of surfaces.
The user must supply other mounting hardware (screws, etc.) and determine its suitability for use
with the chosen mounting surface.
1
Mark a straight horizontal or vertical line where
you want to mount the Power Strip. At each end
of the line, mark where the edges of the Power
Strip will be located. Place a mounting clip on
the mounting surface 1” in from these edges
and mark where the screws must be driven into
the wall. For strips longer than 48” (120 cm),
also mark a screw hole for a third mounting clip
midway between the other two.
2
Clip Mounting: Drive #10 screws through
washers, through the centers of the mounting
clips and into the mounting surface
2a
. Place
the Power Strip inside one edge of the mounting
clips, then snap the Power Strip into place
2b
.
1
2a
2b
15-01-150-933413.indd 3 1/27/2015 4:15:47 PM
To Next Page
Loading...
