Do not allow dirt or debris to enter the braking system when adding brake fluid to the
brake fluid reservoir.
Always maintain absolute cleanliness as this will adversely affect the brake fluid's
properties.
Contaminated brake fluid may cause a reduction in brake performance leading to loss
of motorcycle control and an accident.
During bleeding, do not allow the brake fluid level to fall below the lower level mark in
the reservoir.
If the fluid level is allowed to fall below this mark, air may enter the system and the
sequence of bleeding must be repeated.
Trapped air in the braking system may a cause a reduction in braking efficiency
leading to loss of motorcycle control and an accident.
Check for fluid leakage around brake fittings, seals and joints.
Leaks around fittings and joints may allow air to enter the brake system.
Air entering the braking system may a cause a reduction in braking efficiency leading
to loss of motorcycle control and an accident.
To Next Page
Loading...
