1063
8. Check the front brake fluid level and top up as required with new DOT 4 fluid.
9. Check for correct brake operation. Rectify as necessary.
10. Check the front brake fluid level and top up as required with new DOT 4 fluid.
It is dangerous to operate the motorcycle with defective brakes; you must have your
authorised Triumph dealer take remedial action before you ride the motorcycle again.
Failure to take remedial action may result in reduced braking efficiency leading to loss
of motorcycle control and an accident.
Front Brake Caliper – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Do not allow a brake component to hang unsupported on the brake hose or line.
Brake hoses or lines that are not supported may become damaged or bent.
Bent or damaged brake hoses or lines lead to reduced braking efficiency causing loss
of motorcycle control and an accident.
To prevent paint damage, do not spill brake fluid onto any area of the bodywork.
Spilled brake fluid will damage paintwork.
To Next Page
Loading...
