Triumph Rocket 3 GT 2021 - Page 1149

1111
NOTICE
When disconnecting the brake hose from the master cylinder it is necessary to keep
the open end of the hose in an upright position.
Allowing the brake hose to fall downwards will allow an excessive amount of air to
enter into the brake system.
Trapped air may cause the brake lever to feel spongy and contribute to reduced
braking efficiency.
3. Noting its orientation for installation, disconnect the brake hose from the master
cylinder, discard the washers and allow the brake fluid to drain from the master
cylinder outlet into a suitable container.
1. Union bolt
2. Sealing washers
3. Brake hose