Triumph Rocket 3 GT 2021 - Page 1151

1113
Rear Brake Master Cylinder-Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
To prevent paint damage, do not spill brake fluid onto any area of the bodywork.
Spilled brake fluid will damage paintwork.
1. Fit the master cylinder to the rider right hand control plate and tighten the fixings to
18 Nm.
1. Fixings
2. Rear brake master cylinder