Triumph Rocket 3 GT 2021 - Page 1240

1202
Seat – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Insert the ignition key into the seat lock and turn it anticlockwise while pressing
down on the rear of the seat.
2. This will release the rider seat from its lock.
3. Lift the seat up from the rear, and slide the seat rearwards to remove it from the
motorcycle.
1. Locating peg
2. Locating peg lock
3. Seat bracket
4. Fuel tank hinge