Triumph Rocket 3 GT 2021 - Page 1275

1237
6. Tighten the radiator cowls lower fixing to 5 Nm.
7. Align the alignment mark on the radiator cap cover to alignment mark on the
radiator cowl and it the radiator cap cover. Turn the cap cover clockwise to secure.
1. Cover
2. Alignment mark
Side Panels – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Right Hand Side Panel
1. Grasp the panel firmly in both hands and gently pull the top edge of the panel away
from the motorcycle until the spigots are away from the retaining grommets (leaving
the grommets in place).