1342
4. To return the headlight alignment to the factory standard position, move the
headlight unit until the front subframe alignment mark and the headlight bracket
mark are aligned.
1. Front subframe alignment mark
2. Headlight bracket mark
5. Tighten the headlight bracket bolts to, front one first, 15 Nm.
6. Recheck the headlight beam settings.
7. Switch the headlights off when the headlight beam settings are satisfactory.
Headlight/Position Light LED Unit – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
To Next Page
Loading...
