Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Have an assistant stand the motorcycle upright.
2. Clean the area around the filler then remove the filler level plug. Discard the washer.
1. Filler/level plug
3. Fill with 75W/90 fully synthetic hypoid oil that meets specification API Service Level
GL5, such as Castrol SAF-XO fully synthetic hypoid oil, until the level of oil inside the
unit is level with the bottom of the filler.
4. Incorporating a new washer, refit the plug and tighten to 25 Nm.
To Next Page
Loading...
