Triumph Rocket 3 GT 2021 - Page 230

202
NOTICE
The drain plug is magnetic. It is normal for metallic deposits to be attached to the
drain plug magnet.
3. Wipe the drain plug clean, fit a new sealing washer then refit to the final drive and
tighten to 25 Nm.
4. Have an assistant stand the motorcycle upright.
5. Fill with 75W/90 fully synthetic hypoid oil that meets specification API Service Level
GL5, such as Castrol SAF-XO fully synthetic hypoid oil, until the level of oil inside the
unit is level with the bottom of the filler.
6. Incorporating a new washer, refit the plug and tighten to 25 Nm.
Check Lights, Instruments and Electrical Systems
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Check the instruments, lights and electrical systems for functionality. Rectify if necessary.