Triumph Rocket 3 GT 2021 - Page 35

7
General information
Ignition System Safety Precautions
The ignition system produces extremely high voltages. Do not touch any part of the
ignition system or any cables while the engine is running.
An electric shock caused by contact with the ignition system may lead to illness, injury
or death.
M1 = M2 x L1/L2
Example
M2 is the required
tightening torque to be
applied
90 Nm
L1 is the normal length of
the torque wrench,
measured from the centre of
the drive square to the
centre of the handle
300 mm
L2 is the extended length of
the torque wrench,
measured from the centre of
the crow foot spanner head
to the centre of the handle
325 mm
M1 is the calculated torque
wrench setting
83 Nm