In some cases, when a fault is detected, the engine management system will revert to
a limp-home mode. In this mode, the engine will still function though the performance
and fuel economy may be marginally affected. In some cases, the rider may not notice
any appreciable difference from normal operation.
Service Symbol/General Warning Symbol
The service symbol will illuminate for five seconds after the motorcycle start up
sequence as a reminder that a service is due in approximately 60 miles (100
km). The service symbol will illuminate permanently when the mileage is
reached, it will remain permanently illuminated until the service interval is reset
using the Triumph Diagnostic tool.
The general warning symbol will flash if an ABS or engine management fault
has occurred and the ABS and/or MIL warning lights are illuminated. Rectify the
fault and clear the diagnostic trouble codes using the Triumph Diagnostic tool.
To Next Page
Loading...
