40
Example
• Pressing the headlight main beam button on the switch housing (left hand
handlebar) confirms to the instruments that headlight main beam is required.
• The instruments confirm the data has been received correctly and that the data is
valid.
• Once confirmed the headlight main beam is switched on.
• Triumph currently uses LIN on certain models for communication between the
instruments and the following components:
• Fog light button
• Heated seat
• Dip beam/Daytime running lights (DRL) switch (if equipped)
• Mode button
• Turn signal switch
• Joystick button
• Horn button
• High beam button
To Next Page
Loading...
