690
Immobiliser and TPMS Control Module ID Incompatible
Unmatched Immobiliser/chassis ECM,
causing the engine ECM to be
disabled to prevent the motorcycle
from being operated
This is also identified by a fast
flashing MIL indication and a disabled
engine management system.
Follow the Pair ECM and Immobiliser
procedure as described in the Triumph
Diagnostic Tool user guide
Action complete - quit test
ABS Modulator Communication
CAN fault - lost communication with
ABS module or ABS system status
Error
View and note 'freeze-frame' data if
available.
Make sure ABS modulator connector
is secure.
Proceed to pinpoint test 1:
To Next Page
Loading...
