756
3. Remove the fuel pressure regulator from the fuel pump plate. Discard the large O-
ring from the fuel pressure regulator and the small 0- ring in the pressure regulator
housing.
1. Large O-ting
2. Fuel pressure regulator
3. Small O-ring
Fuel Pressure Regulator – Inspection
1. Inspect all hoses for cracks, splits, fraying and other damage. Replace as necessary
2. Check all hose clamps for cracks and signs of distortion. Replace as necessary
3. Check the mesh filter for damage and replace if necessary.
Fuel Pressure Regulator – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
To Next Page
Loading...
