Triumph Rocket 3 GT 2021 - Page 883

845
NOTICE
Note the orientation of the three header gaskets for installation.
7. Remove and discard the three gaskets from the cylinder head.
Exhaust Headers - Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Fit new exhaust header gaskets to the cylinder head as noted for removal.
1. Gaskets
2. Fit the exhaust header pipe to the cylinder head. Do not fully tighten the fixings at
this stage.
3. Fit a new exhaust gasket to the header pipe.