Triumph Rocket 3 GT 2021 - Page 993

955
Rear Suspension Unit – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Part of the main harness is routed near the rear suspension unit upper fixing.
Care must be taken not to damage the harness when removing or installing the rear
suspension unit and its fixings.
1. Carefully manoeuvre the rear suspension unit to its upper mounting on the frame.
2. Fit the upper mounting bolt and sleeve as noted for removal.
1. Bolt
2. Sleeve