168
Steering and Suspension
Steering – check for free operation Day • • • • •
Front and rear suspension - check for damage/leaks/
smooth operation
Day • • • • •
Fork oil – replace - •
Steering head bearings – check/adjust - • • • •
Steering head bearings – lubricate - • •
Rear suspension linkage – check/lubricate - • •
Brakes
Brake pads – check wear levels Day • • • • •
Brake master cylinders – check for fluid leaks Day • • • • •
Brake calipers – check for fluid leaks and seized pistons Day • • • • •
Brake fluid levels – check Day • • • • •
Brake fluid – replace Every 2 years, regardless of mileage
Final Drive
Final drive – check for oil leaks Day • • • • •
Final drive oil level – check - • • • •
Final drive oil – replace – only first service - •
Electrical
Lights, instruments and electrical systems – check Day • • • • •
General
Instruments, chassis ECM and engine ECM - check for
latest calibration download using the Triumph
diagnostic tool
- • • • • •
Bank angle indicators - check for wear Day • • • • •
Fasteners – inspect visually for security Day • • • • •
Accessory rack sliding carriage – check for correct
operation‡
- • • • •
Side stand – check for wear/smooth operation Day • • • • •
Side stand pivot pin - clean/grease - • • •
Center stand – check for wear/smooth operation Day • • • • •
Center stand flanged sleeves – check/clean/grease - • • • •
Gear shift pedal - clean bushes - • • • •
‡Only if equipped.
To Next Page
