TRIWA NEVIL - CHANGE STRAP; Changing the strap; ATTACHING NATO;MONO STRAP; Attaching NATO;Mono Strap

3 pages

To Next Page

To Previous Page

CHANGE STRAP

1. Using the TRIWA strap tool, place the strap changing end between the lug and the strap to reach the metal pin

2. Push down to release the spring and remove the strap

3. Move the pins from the old to the new strap

4. Place the pin end to the lug hole

5. Use the tool again to push down the spring so that the pin end reaches the hole for fastening

ATTACHING NATO/MONO STRAP

1. Unless the watch has ﬁxed lugs, use the TRIWA strap tool to remove the existing strap (see 'CHANGE STRAP'

instructions)