10107M-12
COMPUTER KEYS
Start/stop key Press the “start/stop” key and the treadmill begins to run at a speed of 1.0km/h. When the treadmill
is running at a speed of more than 3.5km/h, press the “start/stop” key and the treadmill stops slowly.
During this operation, no other keys will function. If the speed is less than 3.5km/h the treadmill stops
immediately if the “start/stop” key is pushed.
Clear/set key When the treadmill stops, press the “clear/set” key and all the data will be cleared. Press the button again
for 3 seconds and TIME, DISTANCE and CALORIES can be changed. Press “set +” or “set -“to set TIME,
DISTANCE and CALORIES. Now press “start/stop” and the treadmill runs at the speed of 1km/h and
the set figures will start counting down. When the figures reach 0 the treadmill will stop.
Mode key When all the figures are cleared, press the “mode” key to choose the running program. There are 12
pre-set programs that can be chosen from and each program lasts 30 minutes. The speed can be set
to automatically change every minute, or it can be changed manually as required. A bell rings 3 times to
warn the user just before the program ends.
To Next Page
Loading...
