Tronsmart Apollo Q10 - Controls and Troubleshooting; Resetting the Headset; Touch and Button Controls

How to Reset if the headset is malfunctional?
1. Power on the headset.
2. Press and hold the MFB button and the power button for 5 seconds to
disconnect Bluetooth and enter the pairing mode.
3. When the indicator light flashes red and blue, the pairing setting will be cleared
and reset is completed.
Touch & button control
R
R
R
R
R
R
MFB
Switch three modes
Play/Pause
Next track
Previous track
Volume +
Volume -
Activate voice assistant
Press and hold for 3 seconds
Tap twice
Swipe right/forward
Swipe left/back
Slide up
Slide down
Press to activate
On: 2 s
power off state
hold 2 s
hold 5 s
power on state
Double-click
03