8 EN
air cooler PAE 51 / PAE 51 B
• Make sure that extension cables are completely unrolled.
• Make sure that no curtains or other objects interfere with
the air flow.
Observe the following before operating the device after a period
of non-use or after the device has been stored:
• Clean the housing and the water tank prior to
recommissioning (see chapter Maintenance).
Inserting the battery into the remote control
Warning of electrical voltage
Do not touch the battery compartment with wet or
damp hands.
Notice
Do not use rechargeable batteries!
Observe the Technical data for start-up.
Please proceed as follows to insert or exchange the battery:
1. Press the locking at the side of the battery compartment
together and pull the battery compartment out of the
remote control.
2. Insert a type CR 2032 battery into the battery compartment
and slide the battery compartment back into the remote
control.
Wheels
To ensure simple transportation the device comes equipped
with wheels. Moreover, two of the wheels are fitted with a
parking brake to ensure a firmly fixed position. Please proceed
as follows to apply or release the parking brakes:
• To facilitate easy transport, release the parking brakes.
• To ensure a firmly fixed position, apply the parking brakes.
Filling the water tank
The device requires fresh drinking water for air cooling.
Notice
Fill the device with fresh drinking water only. The
water temperature must not exceed 40°C.
Info
If possible, change the water every3days to prevent
bacterial growth.
Observe the following when using the ice packs:
• Put the ice packs into a freezer for at least 4hours before
use.
• Put the ice packs into the water tank before filling water
into the tank.
Info
When using ice packs at high outside temperatures,
condensation may form at the water tank and drip onto
the floor.
To Next Page
Loading...
Need help?
General
