Trotec PGGS 10-3,7V User Manual

7 EN
Operating manual – cordless glue gun PGGS 10-3,7V
1. Insert the device into the charger(7).
7
2. Insert the mains plug of the charger(7) into a properly fused
mains socket.
ð The battery level indication(3) is illuminated in red.
3
ð Charging requires approx. 3 hours.
3. Wait until the light of the battery level indication(3) turns
green.
3
ð The batteryis fully charged.
4. Pull the mains plug of the charger(7) out of the mains
socket.
5. Take the device off the charger.
ð The device and the charger may have become warm
during charging.
Checking the battery charging status
The charging status is displayed by the battery level indication
as follows:
LED colour Meaning
Green The battery is fully charged.
Red The battery is empty. Recharge the battery.
Inserting a glue stick
1. Push a glue stick into the feed channel(9).

Trotec PGGS 10-3,7V Specifications

General

Brand	Trotec
Model	PGGS 10-3, 7V
Category	Glue Gun
Language	English