4–12
WARNING
Step away from the oven during ignition. Do not
override the door lock. As the binder burns, the
oven display may indicate higher oven temperatures
than expected. This can be caused by the flame
contacting the oven thermocouple.
13. The oven locks the chamber door at the start of the burn cycle.
During the burn, the oven displays the chamber temperature, the
current sample mass and initial sample mass, the %Loss, and
the elapsed burn time:
Temperature XXX C
M. (XXXX.X) XXXX.X g
%Loss -XX.XX %
Burn Time XXX:XX
14. When the mass loss does not exceed 0.01% of the sample mass
(W
S
) for three consecutive one-minute periods, the burn is
complete. The oven displays the results of the burn as shown
below. If five minutes have elapsed since the chamber
temperature has peaked, the oven also releases the door lock,
lights the red BURN COMPLETE indicator, and sounds the
annunciator.
NOTE
The oven will not unlock the chamber door, light the
BURN COMPLETE indicator, or sound the annunciator
until five minutes have passed since the chamber
temperature has peaked. Typically, this five-minute
period will have elapsed before the burn is complete.
%AC XX.XX%
Loss XXX.Xg XX.XX%
Elapsed Time XXX:XX
press ENTER
To Next Page
Loading...