Why is my TRU-BLU Pet Care Product not providing credit for accepted notes?
If your TRU-BLU Pet Care Product unit isn't providing credit for accepted notes, it might be due to an incorrect interface selection. Use the on-board button or GBA Talk to select the required interface. Another potential cause is a poor electrical connection. Ensure the Interface and 18-way cable are connected firmly and correctly.
Why is my TRU-BLU K9000 2.0 Twin Dog Wash Pet Care Product not communicating with the host machine?
If your TRU-BLU Pet Care Product unit isn't communicating with the host machine, the interface selected might be incorrect. Use the on-board button or GBA Talk to select the required interface. Also, check for poor electrical connections, ensuring the Interface and 18-way cable are connected firmly and correctly.
Why is my TRU-BLU K9000 2.0 Twin Dog Wash Pet Care Product unit not working?
If your TRU-BLU Pet Care Product unit isn't working, first ensure the power supply is switched on, verifying that power reaches the motor and the LED is lit. Check that the power supply is properly connected with the correct power cable. Poor electrical connections could also be the cause; ensure the Interface and 18-way cable assemblies are firmly and correctly connected. If the diagnostics indicator is illuminated, the unit might be carrying out a self-test.
What to do if belt motor runs continuously on my TRU-BLU K9000 2.0 Twin Dog Wash Pet Care Product?
If the belt motor and/or stacker motor of your TRU-BLU Pet Care Product runs continuously after being powered on, check for poor electrical connections. Make sure the Interface and 18-way cable are connected firmly and correctly.
What to do if my TRU-BLU Pet Care Product rejects all programmed notes?
If your TRU-BLU Pet Care Product is rejecting all programmed notes, acceptance may be inhibited for the required notes. Use the on-board button or GBA Talk to enable the notes you need.
General| Brand | TRU-BLU |
|---|---|
| Model | K9000 2.0 Twin Dog Wash |
| Category | Pet Care Product |
| Language | English |
Clarifies the meaning of the warning symbol used in the manual.
Explains the purpose and usage of the tip symbol.
Highlights the significance of the 'Important - Take note' symbol.
Details the regulatory compliance mark and its implications.
Describes the symbol indicating potential electrical hazards.
Explains the meaning and application of the European Conformity mark.
Provides detailed technical specifications for the K9000 2.0 Twin Dog Wash unit.
Step-by-step instructions for assembling the two main parts of the dog wash.
Instructions on how to correctly level and position the dog wash unit for optimal operation.
Details for connecting water supply, adjusting pressure, managing hot water, and waste.
Electrical connection guidelines for electricians to safely power the dog wash.
Final steps to finalize the installation process and prepare for commissioning.
Details the main board layout including breakers, dryers, console, and dosing pumps.
Explains the function and components within the control module.
Provides recommended factory settings for dosing pumps and adjustment instructions.
Procedure for removing air from product dosing pumps when product runs out or is replaced.
Presents an exploded diagram and parts list for the Iwaki EJ Series dosing pump.
Procedures for adjusting temperature when using site-supplied hot water.
Instructions for adjusting temperature using the onboard hot water unit.
Highlights key components like ECUs, coin acceptors, and warning beeper.
Instructions on enabling/disabling coins and operating the coin acceptor.
Step-by-step guide for removing the coin acceptor unit for maintenance.
Detailed instructions for cleaning the coin acceptor and its components.
Lists and explains fault codes indicated by the flashing light on the Mei note acceptor.
Procedure for removing the Mei note acceptor for cleaning or servicing.
Guide on cleaning the Mei note acceptor, focusing on the stacker and optical sensors.
Instructions for fitting and removing the note cassette from the GBA ST1 validator.
Steps for cleaning the internal note path and sensors of the GBA ST1.
Procedure for safely removing jammed notes from the GBA ST1 acceptor.
Addresses common problems, causes, and solutions for note acceptor issues.
How to configure the dryer bypass for summer and winter conditions.
Adjusting heat settings on the dryer based on ambient temperature.
Instructions for correctly connecting the dryer hose to the dryer elbow.
Details settings for time, costs, and other user-configurable parameters.
Instructions for testing unit functions, switches, and buttons.
Accesses reports on machine revenue, usage, and faults.
Displays board information, firmware version, serial, and asset numbers.
Notes that Service Menu 5 is for factory use only.
Notes that Service Menu 6 is for factory use only.
Specific tasks for daily, weekly, monthly, and 3-monthly maintenance.
Identifies external parts requiring regular maintenance checks.
Instructions for cleaning dryer foam filters and checking clamps.
Steps for cleaning the wash tub, floor area, and filters.
Information on canine parvovirus and cleaning recommendations for hygiene.
Provides links and password for supplementary video guides.
To Next Page
