3. Remove bottle and fill with your favorite
cleaner, disinfectant or water. Always include
at least 30% water in your cleaning solution
Attach upper pole to lower pole
and twist together until the white
push button locks in place
1.
ASSEMBLY & USE INSTRUCTIONS
2. Attach lower pole to mop head by
aligning the clasp and inserting until
pole locks in place
4. Securely screw cap to bottle
and firmly insert in to spray mop
TIP: Try adding
essential oil
for a natural clean
scent
6. Pull spray trigger to evenly
spray your cleaning solution
5. Attach microfiber mop pad to bottom
of spray mop by aligning the velcro pads
TIP: Purchase extra mop pads at www.trueandtidy.com
To Next Page
Loading...
Need help?
General
