Trueshopping BC680 - Page 5

Trueshopping
Figure 40 Spool Loaded ................................................................ 30
Figure 41 Step 10 Align Notches .................................................... 31
Figure 42 Loaded Spool ................................................................. 31
Figure 43 step 11 Put Thread Through Holes ............................... 32
Figure 44 Step 12 Replace Lid ....................................................... 32
Figure 45 Step 13 Click Lid ............................................................. 33
Figure 46 Step 14 Pull Thread Tight .............................................. 33
Figure 47 Status Before Starting .................................................. 37
Figure 48 Put Choke into On Position .......................................... 37
Figure 49 Pull Recoil Starter ......................................................... 38
Figure 50 When Running Return Choke by Hand ........................ 38
Figure 51 Chokes Position At Start ............................................... 39
Figure 52 Put Choke to this Position ............................................ 39
Figure 53 Pull the Recoil Starter ................................................... 40
Figure 54 Pull the Trigger, Choke Returns Automatically ........... 40
Figure 55 The Primer ..................................................................... 43
Figure 56 Recoil Starter Motor ..................................................... 44
Figure 57 Hand Grip Controls........................................................ 45
Figure 58 Spark Plug Gap .............................................................. 54
Figure 59 Finding the Air Filter ..................................................... 55
Figure 60 The Bevel Gear .............................................................. 57
Figure 61 Greasing The Bevel Gear ............................................... 57
www.TrueShopping.co.uk
Page: 5 of 69