Need help?Do you have a question about the Trueshopping BX1-100 and is the answer not in the manual?
General| Brand | Trueshopping |
|---|---|
| Model | BX1-100 |
| Category | Welding System |
| Language | English |
Instructions for connecting the unit via a three-pin plug to a 230V supply.
Guide on how to assemble the welding face shield using the provided parts.
Details the essential protective clothing and gear required for safe welding operations.
Information on preventing fires and explosions by managing flammable materials and work area conditions.
Measures to avoid electric shock, including earthing, RCD usage, and cable integrity.
Precautions related to electromagnetic fields for pacemaker users and safety concerning welding fumes.
Guidelines for safe maintenance, including power isolation and correct part usage.
Details the function and usage of the eight-step adjustment switch for setting welding current.
Explanation of the overload light, what it signifies, and the procedure to follow when it activates.
Select and insert the welding rod into the holder, matching its thickness to the workpiece.
Ensure the welding area and workpiece are perfectly clean, removing coating, plating, or corrosion.
Connect the earth clamp firmly to clean, solid metal on the workpiece close to the weld point.
Line up the electrode, tap to strike the arc, maintain the correct gap, and feed the electrode steadily.
Use low-pressure air to blow dust and dirt from the unit and torch head.
Instructions on how to replace the welding wire on the feed reel when it is depleted.
Diagnosing and resolving issues related to no output, improper fuses, or overload settings.
Addressing problems with poor input voltage, bad connections, or damaged internal components.
Solutions for when the welder does not turn on, arc does not transfer, or difficulty in arc starting.
Identifying and resolving issues caused by voltage being higher or lower than the rated input voltage.
To Next Page
