4
Intended use
This appliance has been designed for installation in motor
homes and caravans and is intended for private use.
Installation dimensions (in mm)
670
556*
785
265
46
25 - 110
Fig. 6
400
(380)
400
(350)
523 / 496*
192
(212)
310
560
Fig. 7
*air distributor small
Clearance around the air conditioning system
The clearance around the external unit must be 20 mm at
the front and 50 mm at the side. At least 20 mm of clearance
must be left at the rear. Truma recommends clearance of
50 mm so that the exhaust air can blow out freely.
50
560
50
50
785
20
20
Fig. 8
The clearance around the air distributor must allow the air
to blow out without obstructions. The side clearance must be
at least 40 mm (not in the case of the air distributor small).
The pivoting range of flaps and doors must be taken into
consideration.
400
670
380
78
523
400
350
40
46
FRONT
Fig. 9 – Air distributor
400
556
380
50
496
400
350
46
FRONT
Fig. 10 – air distributor small
Air inlets / outlets
Fig. 11
Condensation traps
The condensation is led away via the roof of the vehicle.
Fig. 12
Subject to technical changes.
To Next Page
Loading...
