Need help?Do you have a question about the Trumatic SL3002 and is the answer not in the manual?
Factory repairs defects from material or faulty workmanship.
Send defective units freight prepaid for factory inspection.
Factory may replace defective units instead of repairing them.
Costs apply for units not under guarantee or consequential losses.
Return regulator with damaged heater for assessment.
Using non-original parts voids the warranty.
General| Type | Gas Heater |
|---|---|
| Model | SL3002 |
| Gas Consumption | 30-280 g/h |
| Ignition | Piezo Ignition |
| Operating pressure | 30 mbar |
| Heat Output | 3.4 kW |
| Type of gas | Butane/Propane |
To Next Page