Before using the spare parts list
Spare parts list The present spare parts list documents the Tool Grinding Machine
quicksharp.
The spare parts list is intended not only for the user and operator of
the machine but also for the maintenance personnel. This group of
persons must have access to the spare parts list.
Reference Guides Besides the spare parts list, the machine documentation also includes
the:
• Operator's Manual
• Circuit diagram
Ordering example
To avoid delays and mistakes you are urged to state the following
when ordering spare and/or replacement parts
1. Designation of machine
2. The factory serial number of the machine
3. Designation of the part and its ordering number
4. Exact quantity of parts required
5. For electrical parts state voltage, and cycles per secondif
applicable
6. Requested shipping instructions; e.g. air mail, air freight, express,
railway freight, parcel pst, etc.
7. Exact adress
Ordering example Designation of machine: quicksharp
Factory serial number: 1525
Designation of part: Boron nitride grinding wheel
6840-2780
Ordering No.: 032498
Quantity of parts: 1
Shipping instructions: Air mail
Complete address: .....
4 Before you read on... B60EL
To Next Page
Loading...
General