Trumpf TruBend 2000 Series User Manual

Chapter 1
Safety
1 For your safety 1‐3
2 Operational safety 1‐4
2.1 Intended use 1‐4
2.2 Authorized personnel 1‐5
3 Hazards 1‐6
3.1 Dangers due to the open electrical cabinet 1‐6
3.2 Hazards due to laser radiation 1‐6
3.3 Dangers handling workpieces 1‐7
Sharp-edged workpieces 1‐7
Upper and lower tool 1‐7
Flange of the workpiece 1‐8
Positioning the workpiece 1‐9
Falling workpieces 1‐9
Improper handling of flat workpieces 1‐10
Improper handling when bending boxes 1‐10
B1161en 2019-07-09
Safety
1‐1

Trumpf TruBend 2000 Series Specifications

General

Brand	Trumpf
Model	TruBend 2000 Series
Category	Power Tool
Language	English

Summary

3. Hazards

3.1 Dangers due to the open electrical cabinet

Highlights risks associated with accessing the electrical cabinet.

3.2 Hazards due to laser radiation

Details dangers arising from laser radiation emitted by the machine.

3.3 Dangers handling workpieces

Covers risks encountered when handling workpieces during operation.

4. Measures to be taken by the manufacturer

4.1 Danger zones and safeguarding device

Identifies danger zones and describes protective safeguarding devices.

5. Organizational measures to be taken by the user

6. Overview of residual risks

Electrics

Covers risks related to electrical hazards and contact.

Chapter 2

TruBend Series 2000 (B35) installation conditions

Details installation requirements for the TruBend Series 2000 (B35).

2 Installation site

Specifies requirements for the machine's installation location.

3 Electrics

Covers electrical requirements and connections for the machine.

6 Transport

Provides instructions for safely transporting the machine.

1. Planning aid

Installation site

Details site requirements including space, floor, and ambient conditions.

2. Installation site

2.2 Floor requirements

2.3 Weight load

Weight load

3. Electrics

3.1 Power supply

3.2 Power supply

4. Operating materials

4.1 Hydraulic oil

6. Transport

6.1 Preparing transport

6.3 Checking, unloading and transporting the machine

7. Installation

7.1 Positioning the machine and drilling holes

Covers positioning the machine and drilling holes for anchoring.

8. Set-up and positioning

8.1 Preparing adjustable legs, positioning the machine

11. Electrical connection

11.1 Connecting the power cable

Provides instructions for connecting the main power cable.