11. Mounting the casing
Mount the casing of the ALKCT on a flat surface and secure it with screws. (Mounting screws not
included)
12. Place ALKCT in casing
When the casing has been mounted and secured with screws place the ALKCT in the casing. To place
the ALKCT slide it in from top to bottom.
13. Close the casing
To close the casing put the frontplate on the backplate and push down till you hear a click. This means
the front plate has been locked on the backplate. Secure it with screwing the previously untightened
screws back on the bottom of the casing.
EN
To Next Page
Loading...
