Need help?Do you have a question about the Trust APIR-2150 and is the answer not in the manual?
Procedure to remove screws and open the battery compartment for access.
Instructions for correctly inserting 2x 1.5V AAA batteries into the compartment.
Steps to program the transmitter's code into compatible receivers for communication.
How to verify successful code assignment by testing transmitter-receiver reaction.
Adjust the sensor's activation threshold based on ambient light levels (High, Medium, Low).
Securing the sensor housing by tightening screws to maintain waterproofness.
Affixing the holder and placing the motion sensor securely in its designated position.
Procedure to remove screws and open the battery compartment for access.
Instructions for correctly inserting 2x 1.5V AAA batteries into the compartment.
Steps to program the transmitter's code into compatible receivers for communication.
How to verify successful code assignment by testing transmitter-receiver reaction.
Adjust the sensor's activation threshold based on ambient light levels (High, Medium, Low).
Securing the sensor housing by tightening screws to maintain waterproofness.
Affixing the holder and placing the motion sensor securely in its designated position.
General| Sensor type | - |
|---|---|
| Transmission distance | 30 m |
| Connectivity technology | Wireless |
| Battery type | AAA |
| Battery voltage | 1.5 V |
| Power source type | Battery |
| Battery technology | Alkaline |
| Number of batteries supported | 2 |
| Product color | Black |
| International Protection (IP) code | IP44 |
To Next Page