Trust GXT 288 - Product Installation and Setup; Installation Steps; Usage Notes and Troubleshooting

GXT 288 Steering Wheel – USER’S MANUAL
- USER’S MANUAL
3
Product installation
Place the steering wheel at the edge of the table and turn the handles to fasten the table clamps.
Press the lever on the bottom of the pedals to activate the grip bar. (For use on carpet floor).
Insert the cable of the pedals into the backside of the steering wheel. Connect the USB to PC or PS3.
Different input types (X-input / Direct-input) can be selected by switch ‘A’.
If your game does not support XInput, the steering wheel will not be recognized in the game.
When connected to PC: Open Game Controllers in Windows Control Panel. Test all functions and
calibrate if needed.
When connected to PS3: Press ‘mode’ button to activate the steering wheel.
Adjust the wheel sensitivity by turning the sensitivity wheel ‘B’.
Default key functions for X-input / Direct-input & PS3.
Make sure your game supports this kind of game controller. Read the instruction manual of the game to
approach the best settings.
The ‘Mode’ button is designed for PS3 use only.
The following options will only work if supported by the game:
 Vibration feedback.
 Buttons Δ, O, X, , and foot pedals are pressure sensitive (only on PS3).
If the wheel is not detected in game, switch ‘A’.
8
7
6
5
4
3
2
1