3
MANUAL DEL USUARIO / USER’S MANUAL
ST series: ST-10CX
TSA. Subject to change without notice.
Connections ST-10CX
+
-
+
-
N
L
4
P
A
R
A
L
L
E
L
Pin +1
Pin - 1
Pin +2
Pin - 2
X
-
O
v
e
r
HF
LF
IN
Dimensions ST-10CX
Hardware ST-10CX
Connection in pass ive (pin 1+ / 1-)
Designed and manufa ctured by Tecno Star, S.A. Made in Spain.
REAR
FRONT
Mod. AX-110
S. N. XXXXX
SIDE
Mod.
S. N.
Designed a nd manuf actured by Tec no Star, S.A. Made in Spain.
Connection in passive (pin 1+ / 1-)
REAR
FRONT
SIDE
34 cm.
31 cm.
14 cm.
29 cm.
Technical data ST-10CX
Usable bandwidth (-10dB) 80 - 20.000Hz
Maximum SPL (*) 131 dB (preset)
Coaxial coverage angle (-6 dB) 90°
Coaxial Transducer LF/HF 10” LF woofer / 1.75” Compression driver
Nominal impedance: 8 Ω
AES power handling: 300 W
Connectors: 2 x NL4
Rigging components: 4-point rigging system
Permissible flight load: 12 units
Inter-enclosure angles (degrees): 0 / 2.5 / 5 / 7.5 / 10 / 12.5 / 15
Physical data
W x H x D: 290 x 310 x 340 mm.
Weight (net): 11 kg.
Cabinet: First grade Baltic birch plywood
Side panels: Steel rigging hardware
Finish: High resistance rough black paint
Front Steel grill: Steel grid with anti-corrosion coating and foam
Rigging components: High grade steel with anti-corrosion coating
(*) Peak level at 1 m under free field conditions using 10 dB crest factor pink noise with specified preset.
To Next Page
Loading...