TSC MH361T Series User Manual

- 46 -
Security
This feature is used to set the password for locking the
menu/favorites. The default password is 8888.
Disable
Ribbon Low
Warning
This item is used to set the warning for ribbon low. For
example, if setting value is 30 m, when ribbon capacity
was lower than 30m, the will be shown in red.
30 m
Printer Head
Maintn
This item is used to check print head status and to set
the settings for print head care.
Item
Description
Warning
This item is used to enable/disable
the print head clean warning. If
enable this feature, once print head
has been reached the setting
mileage then the warning icon will be
shown on printer UI for reminding
user to clean the print head. The
default setting is disable.
Reset
Counter
This item is used to reset the print
head clean warning mileage after
cleaned print head.
Interval
This item is used to set the expected
mileage for reminding user to clean
the print head. You have to enable
the “TPH warning lock” for use. The
default setting is 1 km.
Disable
Key Sound
This feature is used to ON/OFF the printer key sound
ON
Contact us
This feature is used to check the contact information for
tech support service.
N/A

TSC MH361T Series Specifications

General

Brand	TSC
Model	MH361T Series
Category	Barcode Reader
Language	English