TSL Horti Tech ROI-E680 - Introductions

introductions:
PLEASE READ
THESE INSTRUCTIONS
BEFORE USING
THE PRODUCT
Thank you for purchasing the ROI-E680 system.The Roi-E680
Horticulture LED System. An inspired collaboration between two
of the most respected lighting companies in horticulture industry.
TSL Horti Tech and Grower’s Choice have joined forces with their
years of innovative experience to create this high performance
and cost-effective lighting solution for commercial horticulture.
01
02
Technical
Specifications:
Light Source
Spectrum
PPF
Input Power
Efficacy
Fixture Dimension | Wright
Mounting Height
Thermal Management
Dimming
Light Distribution
Lifetime
Power Factor
Certifications
Warranty
≥6” (15.2cm) Above Canopy
Passive
0-10V
120°
L90: >54,000 hrs
>90%
IP65, ETL, CE
3 Years Standard Warranty
LED
GC-3K Full Phase
1700 μmol/s
680W
2.5 μmol/s
42.4” L x 42” W x 2.4” H | 30lbs
107.7cm L x 106.7cm W x 6.2cm H | 13.6kg
SPECIFICATIONS
MAX AMPERAGE BY VOLTAGE SERVICE
VOLTAGE 120V 208V 240V 277V
AMPERAGE 5.872A 3.346A 2.945A 2.618A
2.4”(6.2CM)
42”(106.7CM)
42”(106.7CM)
42.4”(107.7CM)
* PPF calculations complied using our
in-house integrating sphere measurements
and typical spectroadiometric data for
each LED to determine the fixture perfor-
mance. Actual photometric results may
vary within the LED's manufacturer's bin
tolerance.
* Wattage values are typical expected
values. TSL Horti Tech maintains a
tolerance of +/- 10% range on flux and
power consumption. Target light level can
vary from projected levels depending on
ambient temperature, room reflections
values, and other conditions.