installation:
• Switch off mains power
• We always recommend using certified or qualified
installation professional to ensure optimal performance
and safety.
• Unbox fixture and place on flat, stable surface.
• Unfold the fixture with LEDs facing down.
07
08
• Warning: Do not handle the fixture using the LED bars as it can result
damage to the light and performance.
Only lift from the primary fixture structure as shown below.
• The ROI Series can be mounted to the supporting structure or frame by suspend-
ing with carabiner cables (not provided) or other suspension means using the four
mounting rings on the fixture. Maximum fixture weight: 30 lbs
• Mount the light bars at least 8'' from the top of your canopy for optimal light
efficiency and uniformity. Always allow for adequate ventilation of fixture.
8”(20CM)
To Next Page
Loading...