7. Cannot write to disc
(for drives with
write capability).
7-1. Is the disc loaded in the drive with the read/write surface
facing the right direction? The label should be up. If a disc does not
have a label, the disc code on the inner side of the disc should be
properly oriented for reading when looking from the top of the disc.
7-2. CD-R, DVD+R, DVD-R, and BD-R discs cannot be re-written.
7-3. Please check the type of disc that is being used. Please refer to
Specifications section to ensure that the disc type is supported by this
drive.
7-4. Is there enough free space on the writable disc?
7-5. Did a screen saver or other application operate while writing to
the disc? If so, try again with the application turned off.
8. Cannot insert disc
(for slotload drives).
8-1. Check to see that the system is powered up.
8-2. Check whether there is already a disc in the drive. If so, push
eject button to eject the disc, then load the intended disc.
8-3. Note that this drive only supports 12cm discs.
Please read all restrictions and disclaimers.
Back to Contents Page
To Next Page
Loading...