EXERCISES WITH TUA
TUA VISO Is easy to use: once the unit has been
prepared for use and the intensity regulator set
to intensity 3, TUA VISO is Iightly pressed on the
area to be treated. With the possible exception of
the under eye and neck areas, you must turn up
the intensity until you achieve a comfortable visible
contraction of the muscle/s; the intensity to achieve
this will differ between individuals so always go by
what you are feeling and seeing. It is sufficient to
stimulate each area for just one minute a day, but
the usual application times are 2-4 minutes for each
point. Remember to switch off the unit and go back
to intensity 3 before placing the unit on to the next
point.
Due to the individual disposition of muscular
fasciae and nervous fibres, each person has
specific points for obtaining the best possible
contraction.
Shortly we will show you which points on the face
are normally most suitable for achieving valid
exercises, but moving slightly from these areas will
enable you to find your own personal most active
points. Movement with your Tua Viso must be
made during the 3 seconds of pulse emission, not
during the 3 second pause. To make things easier,
the search for your active points can be carried
out while keeping the timer button continuously
pressed down with your index finger. This makes
the pulse continuous (without any pauses) which
gives you all the time necessary for Iocating
your points. When the button is released, normal
operation of TUA VISO is automatically resumed.
The application points have been chosen with the
objective of activating the less used facial muscle
fibres and reinforcing those which tend to drop and
slacken most with the passage of time.
When a revitalising, nourishing and detoxifying
effect is preferred for the skin rather than
precise facial muscle exercises, the unit can be
slowly passed over the entire face and neck,
over thoroughly cleansed skin (not suitable over
makeup). When using Tua Viso in this way, apply
more water than usual to the sponge domes using
the water dispenser bottle, so they are thoroughly
wet (this produces glide) and press the timer button
down continuously with your index finger to keep
the micro-current pulse constant as you go.
To Next Page
Loading...