ENGLISH
8 9
Da
6 7
10
Run the belt diagonally and
pass it through the guide on
the upper part of the headrest.
Pass the belt through
the hook under the headrest.
The waist
band of the belt should be touching
the base of the seat.
Insert the metal end in the
buckle. It should make a “click”
as it locks.
Hold the seat with one hand
and ghten the belt with the
other.
Check the seat is rmly anchored.
The belt should always be taut.
If the belt is loose, it is not safe
for your baby.
Check and ghten the belt
before starng the engine.
CAUTION
To Next Page
Loading...