Need help?Do you have a question about the Tucker SW10 and is the answer not in the manual?
General| Brand | Tucker |
|---|---|
| Model | SW10 |
| Category | Door Opening System |
| Language | English |
Detailed diagrams and dimensions for single-side push installation frame prep.
Diagrams and dimensions for double-side push installation frame prep.
Diagrams and dimensions for single-side pull installation frame prep.
Diagrams and dimensions for double-side pull installation frame prep.
Diagrams and dimensions for double egress door frame preparation.
Instructions for setting dip switches on the I/O board.
Instructions for setting dip switches on the adjustment board.
Enables Low Energy performance or full power operation settings.
Wiring diagram for low energy applications with specific sensor configurations.
Read this section before installation for critical safety information.
Steps for installing and connecting the KP EVO TAP controller.
Displays current errors detected by the system.
To Next Page
