Need help?Do you have a question about the Tuff-Built BEST HOIST Pro Series and is the answer not in the manual?
General| Weight Capacity | 440 lbs (200 kg) |
|---|---|
| Load Capacity | 440 lbs (200 kg) |
| Line Speed | 36 ft/min (11 m/min) |
| Motor | 1.0 HP (0.75 kW) |
| Weight | 48.5 lbs (22 kg) |
| Dimensions | 24 x 12 x 14 inches (61 x 30 x 36 cm) |
Details of the limited warranty, items covered, and how to obtain service.
Conditions under which the limited warranty does not apply.
Steps to activate and maintain the limited warranty.
Use of the winch for suspending a worker at a work position.
Use of the winch as part of a system for post-fall rescue.
Use of the winch for access/egress in confined spaces and non-entry rescue.
Using the winch for protection against falling while climbing structures.
Using the winch for raising/lowering tools and equipment.
Specifies the maximum load limits for different reeving systems.
Requirements for supporting structures and anchorage safety factors.
Ensuring compatibility of system components for safety and strength.
Requirement to use a full body harness for fall arrest connection.
Information on installing the winch with various accessory products.
Procedures for operating the winch after proper installation.
How to safely connect a worker to the winch line using a harness.
Procedures for inspecting the winch before each use, covering cleaning, physical damage, indicators, and rotation.
Detailed annual inspection process including cleaning, physical damage, brake wear, and rotation checks.
Detailed inspection of the snap hook, its overload indicator, and locking mechanism.
Procedure for inspecting wire rope winch lines for damage and wear.
Procedure for inspecting synthetic rope winch lines for damage and wear.
How to clean the winch exterior and labels using mild detergent.
Instructions for lubricating the brake pads and related components.
How to lubricate the wire rope after cleaning and inspection.
Lubricating the snap hook's locking mechanism and swivel.
Lubricating the crank handle knob as needed.
Recommended storage conditions for the winch to prevent damage.
To Next Page