EasyManua.ls Logo

TUG Technologies GT-110 - Section 2: Operation; Preoperational Checks

Default Icon
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-2-1
Orig
CD389
Chapter 1
GT110 (24V0 Aircraft Tow Tractor Section 2
SECTION 2: OPERATION
A. PREOPERATIONAL CHECKS
CAUTION: BEFORE USING THE EQUIPMENT, THE OPERATOR
MUST CAREFULLY READ THE INSTRUCTIONS IN THE SAFETY
SECTION OF THIS MANUAL AND IN THIS SECTION. THE
OPERATOR MUST ALSO BECOME FAMILIAR WITH THE TOW
TRACTOR’S CONTROLS, INDICATORS, AND EQUIPMENT AS
DESCRIBED IN TABLES 2-1 thru 2-7 OF THIS SECTION.
CAUTION: NEVER RUN THE ENGINE WITH RECEPTACLE
CONNECTED TO THE OPTIONAL ENGINE COOLANT HEATER. A
FLOW CHECK VALVE STOPS COOLANT FLOW THROUGH THE
HEATER WHILE THE ENGINE IS RUNNING. THE HEATER WILL BE
DAMAGED IF CONNECTED TO THE HEATER RECEPTACLE WHILE
THE ENGINE IS RUNNING.
NOTE: In temperatures below 40 °F (4.4 °C), ensure that in units with an
engine fuel heater option, heaters are operating 10 minutes prior to engine
starting and turned off before ENGINE STOP/RUN switch is placed in the
RUN position.
NOTE: In temperatures below 40 °F (4.4 °C), ensure that units with an
engine coolant heater option are connected to engine external power source 1
hour prior to engine starting and operation.
In order to ensure safe, reliable operation, perform the following checks prior to operating the tractor:
1. Ensure the park brake switch is applied (set to ON).
2. Walk around the tractor and inspect it for damage or missing equipment.
3. Check for damaged or under-inflated tires. Check that cold tire pressure is 130 psi
(896.3 kPa). Look for cuts and cracks in the tire’s sidewalls and for foreign objects in the
tread.
4. Check the front/rear axle differential cases and planetary hubs for oil leaks.
5. Check for proper operation of the hitches.
Note
Note
Property of American Airlines