TurboChef NGO/SOTA - Page 81

APPENDIX - REPLA
CING OVEN C
OMPONENT
S
A
-8
Figure
Reference #
Item Description Item Part Number Hardware Description Hardware Part Number(s)
64 Kit, Door Switch, Primary* NGC-3033* Included Included
65 Hinge, LHS 102825 Screw, #8-32 x 5/8, PFH, 100 Deg, SS 102811 (qty 3)
66 Hinge, RHS 102826 Screw, #8-32 x 5/8, PFH, 100 Deg, SS 102811 (qty 3)
67 Interlock Switch (Monitor) 102013 Screw, #4-40 x 3/4, Sems, PPHD, SS 102904 (qty 2)
68 I
n
terlock Switch (Secondary)
102013 S
cr
ew, #4-40 x 3/4, Sems, PPHD, SS
102904 (qt
y 2)
69
K
it, Switch Offset, Shim and
Replacement Tab (x2)
i1-3207 S
cr
ew, #4-40 x 3/4, Sems, PPHD, SS
102904 (qt
y 2)
70 P
late, Door Switch, S/M (x2)
NGC-1126
Screw, #4-40 x 3/4, Sems, PPHD, SS
Screw, #8-32 x 3/8, PPHD, Int Sems, SS
102904 (qty 2 each)
102921 (qty 1 each)
71 Stop, Paddle, Door Switch, S/M (x2) NGC-1324 Screw, #4-40 x 3/4, Sems, PPHD, SS 102904 (qty 2 each)
F
igur
e A-9: Primary Switch Detail
Bracket, Latch, Primary Switch
* When replacing the primary switch:
a.)
Discard one of the switches supplied with kit NGC-3033
b.) Use the shorter screws (see Figure below)
c.)
Follow all instructions in the provided field service bulletins FSB-10057 and FSB-10094
d.)
Discard FSB-10055
Spr
ing, Door Latch, Primary Switch
64
Toggle, Latch, Primary Switch
P
late, Door Switch, Primary
Pin, Clevis, 3/16 Dia x 1”, P Switch
S
t
op, Paddle, Door Switch, Primary
Interlock Switch (Primary)*
U
se shor
ter screws*